EM/EA/M30 Firmware Update

EM5 Firmware V1.60

Use OTA update on your player or dowload from Google drive

EA5 Firmware V1.44

Use OTA update on your player or dowload from Google drive

EA5 Plus Firmware V1.26

Use OTA update on your player or dowload from Google drive

EM7 Firmware V1.60

Use OTA update on your player or dowload from Google drive

M30 Firmware V1.34

Use OTA update on your player or dowload from Google drive

Firmware notes

1.       Optimized behaviour of volume control during quick changes.

2.       Adjusted volume synchronization in SyncLink control

3.       Improved music library scanning

4.       Adjusted Source switching settings

5.       Improved performance of SyncLink and Wireless Projection

6.       Adjusted some parts of main menu and UI (quick access to streaming services and NAS)

7.       Further fixes and optimizations.

How to update:

Over-the-Air firmware update

1. Make sure your Player is connected to Wi-FI network with access to internet.

2. Go to "Settings" - "Firmware Update".

3. Click on "Online Update" and wait for system to detect new firmware.

4. Wait until firmware is downloaded and fully installed.

5. Perform Full Factory Reset, Needed for the App Update
(System settings - Factory data reset)

Manual Update (recommended for faster update)

1. Copy downloaded .zip file into root/main folder of internal memory or into MicroSD card. 

(without unpacking/opening .zip file)

2. Go to "Settings" - "Firmware Update" and click on "Local Update".

3. In browser, locate the update .zip file.

4. Confirm install and wait until Player updates and restarts itself.

5. Perform Full Factory Reset Needed for the App Update
(System settings - Factory data reset)

Post Update System Guide

Accessing Input Switching menu

Easiest way to access the Input Switching menu is by dedicated icon in the Swipe down menu. Swipe down from top of the screen to view this menu. Available in all parts of the system.

 “Source” Floating button

This second floating button was added to the system, allowing for quick access to Input Switching Menu from anywhere in the system. To open Input Switching Menu, hold on the “Source” button for 2 seconds.

You can hold and drag this button, to move it around the screen. 

“Source” button can be disabled in System settings – Display – Open Audio-Source Floating Ball.

Subscribe to our Email Newsletter and stay updated