NEWS

Get real-time media updates and get the latest news

M30 Firmware Update

M30 Firmware V1.30

Use OTA update on your player or dowload from Google drive

Please be sure to follow step 5 of update guide!!


M30 V1.30 Download


Firmware notes

1. Adjusted system menu in regards to Input Source switch and accessing Streaming services.

2. Optimized library scanning.

3. Fixed issue causing app crash.

4. Other small improvements and fixes.

5. Added output switching to swipe down menu.

(After factory reset, device defaults to RCA output. For use with headphones, set it to "PHONE Output")


How to update:


Over-the-Air firmware update

1. Make sure your Player is connected to Wi-FI network with access to internet.

2. Go to "Settings" - "Firmware Update".

3. Click on "Online Update" and wait for system to detect new firmware.

4. Wait until firmware is downloaded and fully installed.

5. After the firmware update, it’s needed to reset the default music app. 
Go to System settings – Storage – Internal shared storage – Apps – Shanling Music – Clear Data

Alternatively, you can do a full factory reset after the firmware update:
Go to System Setting -> Factory data reset -> Erase Everything


Manual Update (recommended for faster update)

1. Copy downloaded .zip file into root/main folder of internal memory or into MicroSD card. 

(without unpacking/opening .zip file)

2. Go to "Settings" - "Firmware Update" and click on "Local Update".

3. In browser, locate the update .zip file.

4. Confirm install and wait until Player updates and restarts itself.

5. After the firmware update, it’s needed to reset the default music app. 
Go to System settings – Storage – Internal shared storage – Apps – Shanling Music – Clear Data

Alternatively, you can do a full factory reset after the firmware update:
Go to System Setting -> Factory data reset -> Erase Everything



Post Update System Guide


Main menu changes 

Streaming services and Input Switching menus were moved to a different place in the system. Please read this guide to learn how to access them in the new Firmware.


Accessing Input Switching menu

Easiest way to access the Input Switching menu is by dedicated icon in the Swipe down menu. Swipe down from top of the screen to view this menu. Available in all parts of the system.

swape.jpg


New “Source” Floating button

This second floating button was added to the system, allowing for quick access to Input Switching Menu from anywhere in the system. To open Input Switching Menu, hold on the “Source” button for 2 seconds.

You can hold and drag this button, to move it around the screen. 

“Source” button can be disabled in System settings – Display – Open Audio-Source Floating Ball.

source button.jpg


New Location of Streaming services

Streaming services were moved to the Input Switching menu. To access this menu, use the “Source” floating button or “Input-Switching” icon in Swipe down menu.

When opening the Streaming services menu, there is slight 5 second delay.

streaming.jpg


New Floating buttons in Wireless Projection on Eddict player

There are two new floating buttons in Wireless projection - Exit Button and Volume Control button. 

If all floating buttons are enabled, you will see 4 floating buttons in Wireless Projection.

All of these buttons can be moved around the screen, making sure they do not cover any UI elements underneath them.

3f5ad54e974c4b5ff1cc81d7972e6eb_resized.jpg



Subscribe to our Email Newsletter and stay updated

Subscribe


        










BACK

>
<