EM7 Firmware Update

EM7 Firmware V1.49

Use OTA update on your player or dowload from Google drive

EM7 V1.49 Google Drive Download

EM7 Firmware notes

1, Added LHDC 5.0 support (Transmitter Only)

2, Adjusted Bluetooth codec settings;

3, Adjusted switching between Headphone and Line-out outputs

4. Optimized SyncLink and DLNA performance

5. Other fixes and improvements

How to update:

Over-the-Air firmware update

1. Make sure your Player is connected to Wi-FI network with access to internet.

2. Go to "Settings" - "Firmware Update".

3. Click on "Online Update" and wait for system to detect new firmware.

4. Wait until firmware is downloaded and fully installed.

5. If you are updating from firmware V1.28 or lower:

After the firmware update, it’s needed to reset the default music app. 
Go to System settings – Storage – Internal shared storage – Apps – Shanling Music – Clear Data

Alternatively, you can do a full factory reset after the firmware update:
Go to System Setting -> Factory data reset -> Erase Everything

Manual Update (recommended for faster update)

1. Copy downloaded .zip file into root/main folder of internal memory or into MicroSD card. 

(without unpacking/opening .zip file)

2. Go to "Settings" - "Firmware Update" and click on "Local Update".

3. In browser, locate the update .zip file.

4. Confirm install and wait until Player updates and restarts itself.

5. If you are updating from firmware V1.28 or lower:

After the firmware update, it’s needed to reset the default music app. 
Go to System settings – Storage – Internal shared storage – Apps – Shanling Music – Clear Data

Alternatively, you can do a full factory reset after the firmware update:
Go to System Setting -> Factory data reset -> Erase Everything

Post Update System Guide

Main menu changes 

Streaming services and Input Switching menus were moved to a different place in the system. Please read this guide to learn how to access them in the new Firmware.

Accessing Input Switching menu

Easiest way to access the Input Switching menu is by dedicated icon in the Swipe down menu. Swipe down from top of the screen to view this menu. Available in all parts of the system.

New “Source” Floating button

This second floating button was added to the system, allowing for quick access to Input Switching Menu from anywhere in the system. To open Input Switching Menu, hold on the “Source” button for 2 seconds.

You can hold and drag this button, to move it around the screen. 

“Source” button can be disabled in System settings – Display – Open Audio-Source Floating Ball.

New Location of Streaming services

Streaming services were moved to the Input Switching menu. To access this menu, use the “Source” floating button or “Input-Switching” icon in Swipe down menu.

When opening the Streaming services menu, there is slight 5 second delay.

New Floating buttons in Wireless Projection on Eddict player

There are two new floating buttons in Wireless projection - Exit Button and Volume Control button. 

If all floating buttons are enabled, you will see 4 floating buttons in Wireless Projection.

All of these buttons can be moved around the screen, making sure they do not cover any UI elements underneath them.

Subscribe to our Email Newsletter and stay updated