Learn more about SCD1.3 SACD Player

Shanling SCD1.3 Firmware V1.9

Download from Google Drive

Shanling MCD1.3 Firmware V1.4

Download from Google Drive

Changes and fixes 

1. Optimized DLNA Performance

2. Optimized Screen Brightness

3. Improved SACD playback behaviour (SCD1.3 only)

4. Optimized Bluetooth connectivity

5. Other fixes and improvements

How to update SCD1.3

            Manual Update

1. Copy the “update.bin” file into root folder / main folder / highest level of USB drive and insert it into the player. 

2. Go to System settings - System Update and click on “Local Update” and confirm. Wait until system restarts and completes the instalation. Check in settings "About" to be sure new firmware is installed. 

3. If the update doesn’t start after choosing “System Update”, please check if the file has been correctly unzipped, if the file is placed in the correct level of the drive, or if the file hasn’t been damaged during the transfer.

Over-the-Air firmware update

1.   Connect player to Wi-Fi network connected to internet. 

2.   Insert USB drives to the player, make sure there is at least 200MB free space on the drive

3.    Go to System settings - System Update, click on “Network update”. Confirm update, firmware will start to download and install. Wait until download and installation is completed and system restarts. Check in settings "About" to be sure new firmware was installed.

Note: If latest version of firmware is already installed, player will show notification and will stop update.